Home » Truck Shop Services

Category Archives: Truck Shop Services

Jeep Parts

If you want to give your Jeep the look and performance, you can shop. Without a working battery, your Jeep would be a driveway decoration. Similarly, your alternator is essential because it converts mechanical energy into electrical energy for the battery.

Jeep Parts

The radiator is the core component of your Jeep’s cooling system. It works by using air passing through the grille to dissipate engine heat as coolant cycles through. This is done to prevent your engine from reaching excessive temperatures, which can damage the cylinders and block, gaskets, and pistons.

A working engine can reach temperatures of up to 2500degC, so it’s essential that you have a proper cooling system in place to avoid overheating. Overheating can cause a variety of issues, including damaged cylinder heads and blocks, blown head gaskets, and seized pistons. To avoid these problems, make sure that you keep your Jeep’s radiator in good working order.

Overheating is typically caused by your Jeep’s radiator not being able to dissipate enough heat quickly. To prevent this from happening, it’s important to regularly flush your Jeep’s radiator and to use a 50/50 mix of water and antifreeze. Using pure antifreeze can damage your radiator, so it’s best to stick with the recommended blend.

When replacing your radiator, look for one that offers the highest thermal efficiency possible. You also want to consider the material the core is made of. Copper has the best thermal conductivity but is too weak to withstand pressure. Aluminum is the next best option and is used by all quality aftermarket radiators. Plastic units, although less expensive, don’t provide the same level of cooling performance as aluminum.

You should also consider the size of your Jeep’s radiator. The larger your radiator, the better it will be able to cool your engine. However, it’s important to remember that more isn’t always better. A single-row radiator with large diameter cooling tubes can perform just as well as a three-row design with smaller tubes.

Once you’ve removed the radiator hoses and coolant overflow tank, you’ll need to remove the electrical plug at the electric fan and the two bolts securing the top of the radiator shroud. You can then remove the four fasteners securing the radiator crossmember and support bracket, and lift it straight up out of the engine bay.

Alternator

Your battery is often the scapegoat when it comes to powering your car’s accessories while your vehicle is running, but there is actually another component that has been generating electrical energy for the rest of your vehicle’s systems: your alternator. Many people think that the battery is responsible for powering things like the radio and wipers while your vehicle is running, but in reality it’s the alternator that has been doing all of that work.

The alternator is a mini-electric generator that turns mechanical energy into electrical energy that your battery then uses to power the vehicle’s ancillary systems. The alternator has a rotor that spins, powered by your engine’s accessory belt, and a stationary stator with bundles of copper wiring that are turned into an alternating current when the rotor’s magnets pass over them.

While the alternator is a critical part of your car’s electrical system, it can be difficult to detect if something is wrong with it. Most cars have warning lights on the dashboard that will alert drivers when something goes wrong, including a light that indicates that your car’s alternator is not working properly. This warning light, which is usually labeled ‘GEN’, ’BAT’ or “ALT”, will turn on when the alternator is not producing enough electrical power to charge your battery and run your vehicle’s accessories.

If the alternator is not working properly, you may notice that your lights or radio aren’t functioning properly, and your battery will quickly deplete. This can be very frustrating, especially if you are trying to get somewhere in your car. Taking your vehicle in for a diagnostic test to see if the alternator is the cause of these symptoms can help you save money by finding out the problem before it leads to more expensive problems.

The alternator is located near the front of your vehicle, and it’s driven by a serpentine belt or drive belt that is also used to drive other accessories such as the water pump and air conditioning compressor. Over time, this belt can wear out and stop the alternator from generating electricity. It is possible to replace a worn out belt, but it’s important to have the alternator tested by a certified professional to ensure that it is still able to recharge your battery and power your vehicle’s accessories.

Brakes

The brakes are one of the most important safety features on any vehicle. They transform the kinetic energy of your Jeep’s spinning wheels and tires into heat to slow and stop your vehicle. The brakes are a crucial part of your vehicle’s system that must be maintained and replaced when necessary to ensure optimal performance.

Brake pads wear down over time, so it is important to inspect them often. If you notice squealing when you step on the brake pedal, this is a sign that your Jeep’s brake pads are getting too thin and should be replaced. Typically, new brake pads last about 50,000 miles before wearing down. However, this varies based on driving style and vehicle usage.

If your brake pads are worn down, it is important to replace them as soon as possible to avoid damage to your rotors and other components of the braking system. Brake fluid is another critical component that should be topped off regularly to prevent overheating and other issues.

There are two main types of brake systems available for your Jeep: disc and drum. Disc brakes use a caliper to squeeze brake pads against a rotor attached to the wheel’s hub, creating friction to slow the vehicle. Drum brakes, on the other hand, use brake shoes to press against a cylindrical drum attached to the wheel’s hub. Disc brakes are more efficient at dissipating heat, making them better suited for off-roading and high-speed driving.

The braking system is also responsible for stopping your Jeep’s rear wheels when you accelerate. This feature is important for keeping the vehicle balanced when you are going over rough terrain or pulling a trailer.

Adding a set of beefy Jeep brake pads is a great way to improve the overall braking performance of your Jeep Wrangler. Choosing a brake pad with a higher friction coefficient can help to increase the speed at which your Jeep can stop. Additionally, a stronger brake pad will resist fade more effectively than a lower friction pad.

A good way to test the performance of your Jeep’s brakes is to perform a “brake bleed.” To do this, start with the rear passenger wheel and open the bleeder bolt. Turn the bleeder valve clockwise and have an assistant pump the brake pedal several times to expel air from the cylinder. After the brakes are bled, close the bleeder valve and top off the master cylinder with fresh brake fluid. Repeat the process for each wheel, ensuring that you don’t run out of brake fluid before each one is completed.

Suspension

The suspension system of your Jeep plays an essential role in the overall driving experience. It’s responsible for absorbing bumps and helping you maintain control in harsh driving conditions. It can be easily upgraded for greater performance. If your Jeep’s suspension has become worn out, you can replace it with a new one to restore the original driving feel of your vehicle.

The first component in your suspension that you can upgrade is the control arm. The control arm is a pivot point for the axle on both sides of your Jeep. It allows the axle to articulate up and down but also prevents forward and backward movement. It can be improved by adding adjustable control arms which allow you to change the caster angle of the front axle. This will help the steering wheel return to center when making a turn and can eliminate “flighty” steering.

Another way to improve your Jeep’s suspension is to install a track bar. The track bar is a crucial part of your suspension as it restrains the axles from moving left and right. A loose track bar can cause death wobble, a condition where the axles will move violently from side to side. A new track bar will resolve this issue and allow your axles to travel in unison for a more accurate ride.

A more extreme modification for your suspension is to add coilovers to your Jeep. Coilovers are a type of shock absorber that has a coil spring over the top of it. The coil spring compresses and retracts based on the weight of the vehicle, allowing you to adjust the height, damping, champer and other features. They are ideal for racing as they offer the ultimate in tuning options.

Aside from the shocks, you can upgrade your suspension by adding a lift kit to your Jeep. A suspension lift kit will raise the body of your Jeep to give you more ground clearance and allow you to fit larger tires. However, it’s important to note that a lift kit is different from a body lift kit, as the latter only gives you the appearance of a raised Jeep.